Nail making machine is machinery and equipment must be based on the different of construction steel, selection of nail making machine is different also, in the whole production process, the effect of nail making machine is particularly important, appropriate steps can get economic benefits, also can improve machine equipment life.
Nail machine operation method: copper, aluminum rod according to the mould, into Automatic Nail Making Machine the ring clamp, plug pin and ring clamp head make sure the whole ground before driving into the tray, otherwise prohibit driving; Grasp the clutch and the power switch of the employees, nail making machine work area road surface should be clean, no blockage (machine equipment can be accumulated within one meter of raw materials) to avoid falls falls; Before driving the first check all electrical equipment is normal, find common faults testing immediately.
Equipment is started, should pay attention to control and avoid tying or break and destroy the uniform machine equipment; Copper, aluminum rod welding welding, should follow the security control technology of automatic welding machine specification, wear goggles, people should be made on the wood block, and should be in the side of the automatic welding machine, in order to prevent electric shock and burn; In the whole drawing process, at the end of the polar filament or interrupt no force in the bottom of the barrel when open connection Nail Making Machine manufacturers leader, more prohibited in face of roll coil regulation line row; Nail making machine machine is running, it is forbidden to do cleaning or adjustment in the machine table maintenance work; Don't leave machine during work time. Construction steel tie knot, when driving ban, should immediately parking solution; Must ask master plate of employee's dynamic password can be up clutch (be sure to push down), avoid drive chain wounded body.
Nail making machine is likely to appear in making the whole process of hat tilted condition, if appear this kind of situation, you should know how to adjust? Here to teach you some common knowledge. Check the knife, to see if a knife pointing Automatic nail machine in the direction of axis, if not, to adjust the knife. If the nail die plan rugged must adjust screw die floor plan. Whether shell mould is loose, if loose our tight. If the nail cutter height is uneven around, is the part of the nail cutter can be.